(Labor ONLY. Parts cost, return shipping and handling additional - Estimate provided prior to work - minimum charge applies.
If you need repairs that are not listed below, or have questions contact Larry Sikes at;
Rock Ridge Gunsmithing 10990 W. Hwy 318 Reddick, Fl 32686 Phone: (352) 591-2980 Fax: (xxx) xxx-xxxx larry@rockridgefarm.com|
Service Charges (per hour) |
$20.00. |
|
Minimum Charge (per gun) |
$20.00 |
|
Test Fire Customer Gun |
|
|
(Ammo & targets not included) |
$6.00 |
|
Clean & Oil Customer Gun |
|
|
(Completely strip & clean, inspect, check for wear, oil & advise customer of repairs needed) |
$20.00 |
|
Check Firing Pin Function |
$8.00 |
|
Remove Live Round From Chamber |
$36.00 |
|
Remove Fired Case From Chamber |
$20.00 |
|
Remove Bore Obstruction |
$20.00 |
|
Remove Barrel Fouling |
Time & Materials |
|
Make & Install Springs |
|
|
Flat Spring |
$36.00 |
|
"V" Spring |
$40.00 |
|
Coil Spring |
$24.00 |
|
Sight In Customer Gun (Left or Right Handed) |
$50.00 |
|
Bore Sight Customer Gun |
$20.00 |
|
Drill & Tap For Sights |
|
|
Per Hole |
$12.00 |
|
Install Front Sight Ramp |
|
|
Solder-on Type |
$24.00 |
|
Screw-on Type |
$20.00 |
|
Band Type |
$36.00 |
|
Install Insert In Pistol Sight |
$16.00 |
|
Build Up Pistol Front Sight |
$24.00 |
|
Install Target Rib, Handgun |
$20.00 |
|
Install Shotgun Bead Sight |
$12.00 |
|
Plug hole & re-drill for bead |
$20.00 |
|
Install Receiver Sights |
|
|
Gun already drilled & tapped |
$8.00 |
|
Scope Mounting |
|
|
Gun already drilled & tapped |
$12.00 |
|
Gun not drilled & tapped |
$28.00 |
|
Handgun Repair |
|
|
Chamfer Revolver Cylinder |
$12.00 |
|
Revolver Action Job |
|
|
Clean & Smooth Action, no parts |
$40.00 |
|
Rebarrel Revolver |
|
|
Remove old barrel, replace with new factory barrel |
$40.00 |
|
Straighten Revolver Crane |
$20.00 |
|
Remove / Modify Revolver Hammer Spur |
$12.00 |
|
Semi-auto Pistol Action Job |
|
|
Clean & Smooth Action, no parts. |
$40.00 |
|
Tighten Slide, 1911 Auto |
$40.00 |
|
Fit Barrel, 1911 Auto |
|
|
Barrel NOT Included |
|
|
Non-ramped Barrel |
$28.00 |
|
Ramped Barrel |
$56.00 |
|
Fit Barrel Bushing, 1911 Auto |
$16.00 |
|
Bevel Magazine Well, 1911 Auto |
$16.00 |
|
Ejection Port Lowering, 1911 Auto |
$20.00 |
|
Throat & Polish Barrel & Feed Ramp, 1911 Auto |
$20.00 |
|
Fit New Trigger, 1911 Auto |
$16.00 |
|
Fit Custom Hammer, 1911 Auto |
$36.00 |
|
Modify 1911 Frame For Beavertail Grip Safety |
$48.00 |
|
Polish & Adjust Extractor, 1911 Auto |
$10.00 |
|
Install Extended Ejector, 1911 Auto |
$10.00 |
|
Install Ambi-Safety, 1911 Auto |
$20.00 |
|
Stipple Front Strap, 1911 Auto |
$28.00 |
(c)Copyright 2004 Rock Ridge Farm
Last Updated 2/17/2004